4G9 ENGINE (E - W) - Exhaust Manifold (GDI)

11A-6b-3

Bracket B

Bracket A

 

Exhaust manifold

Shear-droop

INSTALLATION SERVICE POINTS

"AAEXHAUST MANIFOLD BRACKET INSTALLATION

(1)Slide the washers over the bolts with the chamfered side toward the bolt.

(2)Install temporarily the exhaust manifold brackets A and B as shown in the illustration.

(3)Check that both brackets are in close contact with the bosses, and then tighten fully the bracket mounting bolts.

"BAEXHAUST MANIFOLD BRACKET INSTALLATION

(1)The washers must be installed with the shear-drooped side toward the bolts.

Exhaust manifold

Bracket

(2)Temporarily install the exhaust manifold bracket as shown in the illustration.

(3)Verify that the bracket is brought into close contact with the boss on the exhaust manifold, then tighten the bolts to the specified torque.

E Mitsubishi Motors Corporation

Dec. 1998

PWEE9502-E

Added