11A-7-64G9 ENGINE (E–W)Water Pump and Water Hose

<REAR WHEEL DRIVE>

"FA ENGINE COOLANT TEMPERATURE GAU INSTALLATION

(1)Apply the specified sealant to the threads.

Specified sealant:

3M ATD Part No.8660 or equivalent

"GAENGINE COOLANT TEMPERATURE SEN INSTALLATION

(1)When reusing the sensor, apply the specified sealant to the threads.

Specified sealant:

3M Nut Locking Part No.4171 or equivalent

"HAWATER BY-PASS FITTING INSTALLA

(1)Apply 3 mm diameter of Form-In-Place Gasket (FIPG) to the location shown in the illustration.

Specified sealant:

Mitsubishi Genuine Part No.MD970389 or equivalent.

"IA WATER FITTING INSTALLATION

(1)Apply 3 mm diameter of Form-In-Place Gasket (FIPG) to the location shown in the illustration.

Specified sealant:

Mitsubishi Genuine Part No.MD970389 or equivalent.

EMitsubishi Motors CorporationJun.2002

PWEE9502-K

Added