Additional Information
System Reset Button
If the TV doesn’t respond to either the remote control or the front panel controls or will not power off, press the SYSTEM RESET button on the front panel with a pointed item such as the point of a ball point pen or end tip of a paperclip.
The TV will turn off and the green LED will flash quickly for about one minute. When the green LED stops flashing, you may turn on the TV again. The changes you made while the TV was most recently on, before you used the SYSTEM RESET button, may be lost; the changes you made previously, however, are not lost. Only those changes since the last power on may be lost when the system reset button is pressed. All other settings are retained.
Using the Reset Menu for Reset of the TV or TV Disc
Select any device from the Device Selection menu, except for TV Disc. Press TV MENU followed by 1,2,3 to see the RESET SERVICE MENU to reset the TV or TV Disc.
Read
Your choices are:
Reset System Defaults (CAUTION: All settings, except
Reset TV Disc (Track List will not be affected).
Erase TV Disc (CAUTION: Track List will be cleared).
Reformat TV Disc (CAUTION: Track List will be cleared).
Demo Track
The TV Disc in some TVs comes a with a demo track that plays in a continuous loop. To delete the demo track:
1.Select the TV Disc as the viewing source.
2.Press GUIDE to display the Track List.
3.Highlight the track name “demo track” and press
CANCEL.
4.Press CANCEL again to confirm the deletion.
IMPORTANT
Do not attempt to update the software of this TV with software or cards that are not provided by or authorized by Mitsubishi Digital Electronics America, Inc.
IMPORTANT
Portions of the advanced circuitry of this TV must continue to operate even when the TV is turned off. Some of these circuits therefore need to be cooled at all times. A
20Chapter 1. Television Overview
