Channel Menu
Channel
Figure 17
Figure 17. Channel Menu
Antenna
Select the antenna for the channels you want to edit. You can select
Prefer Digital
When a memorized channel number is available as both analog and digital, a check mark in the Prefer Digital box causes digital channels to be displayed and analog channels to be hidden (when using CH 
or 
). Remove the check mark to show both analog and digital choices. This option is not available when TV Guide On Screen® is enabled.
Channel
Channels can be changed in three ways:
•Press ADJUST 
or 
to select the channel.
•Pressing CH 
or 
to select channels already in memory.
•Enter the number directly. Channel numbers can be one part, analog or digital (up to the number 16383), or two part for digital channels (these use a separator). For a
For digital channels, when the broadcaster has sent a virtual channel number, the virtual channel number is shown in the text box and the original digital channel is shown below on screen as a reference. One original channel number can be associated with several different virtual channels.
Memory
After the available channels have been memorized with Memorize Channels on the Setup menu, weaker channels can be added or unwanted channels can be deleted. Press CH 
or 
on the remote control to see the channels in memory. Press ADJUST 
or 
to select Added or Deleted for the channel shown in the Channel number box.
Name
Analog channels shown on
1.Press ADJUST 
or 
to select each letter.
2.Press ENTER to set the letter and move to the next letter position.
3.Press CANCEL to move back one position.
Digital channels are automatically named if the broadcaster sends the information.
72Chapter 5. TV Menu Operations
