Mitsubishi Electronics WD-62827 manual Connecting a VCR to a Cable Box Audio & Video

Connecting a VCR to a Cable Box (Audio & Video)

VCR to a Cable Box (Audio & Video)

Figure 6

A two-way RF splitter, 4 coaxial cables, right and left audio cables and an S-Video or Video cable are required. These are not included with the TV but are available at most electronics stores.

1.Connect the incoming cable to IN on the RF splitter.

2.Connect one coaxial cable from OUT on the RF splitter to ANTENNA IN on the cable box back panel.

3.Connect one coaxial cable from OUT on the RF splitter to ANT-1 MAIN on the TV back panel. This connection also allows you to use the TV Guide On Screen® feature.

4.Connect one coaxial cable from OUT on the cable box to ANTENNA IN on the VCR back panel.

5.Connect one coaxial cable from ANTENNA OUT on the VCR back panel to ANT-2 AUX on the TV back panel (optional).

6.To use the TV speakers with the VCR, connect a set of audio cables from AUDIO OUT on the VCR back panel to INPUT-1 AUDIO-LEFT (MONO) and AUDIO-RIGHT on the TV back panel. The red cable connects to the R (right) channel and the white cable

connects to the L (left) channel. If your VCR is mono (non-stereo), connect only the white (left) cable.

7.Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel to INPUT 1 VIDEO on the TV back panel. Connect only one type of video cable. S-Video is recommended, if available.

8.For NetCommand®-controlled recordings (including TV Guide On Screen)

a.Connect a set of audio cables from AUDIO IN on the VCR back panel to RECORD OUTPUT/AUDIO- LEFT (MONO) and AUDIO-RIGHT on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel.

b.Connect a video cable from VIDEO IN on the VCR back panel to RECORD OUTPUT/VIDEO on the TV back panel.

Note: With this connection configuration, it is possible to view live cable programs through the VCR. For best picture quality, however, always view live cable programs directly from the cable box instead of the VCR.

7$3 CBDL QBOFM	
)46
"UUBDI POMZ POF WJEFP	
DBCMF UZQF TUFQ  
4WJEFP SFDPNNFOEFE
JG BWBJMBCMF	

B



 C

*G
ZPVS
7$3
IBT
B
WJEFP
DIBOOFM
PS
3'
0/0''
TXJUDI
TFU
JU
UP
0''

Note: NetCommand® will assume your VCR is connected

to inputs as shown on this page. If you use any other inputs for your VCR or add a second VCR, this change must match in the NetCommand

	3' 4QMJUUFS			
		*55&3	065
		-		
	*/	41 8": 580
*ODPNJOH			065

$BCMF	
		
*/
065
	
$BCMF #PY

CBDL
QBOFM
TFDUJPO

$0.10/&/5

:

*/165

065165

C

*/165

:1C1S JQQJ



2







%7*

"6%*0

3&$03%

47*%&0

1C

"OBMPH "VEJP

065165

065165





7*%&0

7*%&0

1S

AUDIO-

LEFT/

"6%*0

"6%*0

-&'5

-&'5

"6%*0

.0/0

.0/0

3*()5

"6%*0

"6%*0

3*()5

1$
'03
)%.*
B 0/-:

)[ 7("
87(" 47("
847(" 9("

9


(-JOL¸

*3 &.*55&3
/FU $PNNBOE¸
			.0/*503-*/,™
			$0/530-34$
%57$"#-&		57 CBDL
7)'6)'
64& 8*5)
$BCMF$"3%™
"/5   "69	"/5   ."*/	QBOFM	065165
			*&&& 
			*/165



system. See Edit NetCommand... in Chapter 3 for more information.

Figure 6. Connecting a VCR to a Cable Box

26Chapter 2. Connecting