Mitsubishi Electronics WD-62827 manual V-CHIP Button, Lock by Time, Front Button Lock

V-Chip Lock Menu, continued

5.Press ADJUST to move to the TV content categories.

•Press ADJUST or to move between categories.

•Press ENTER to add check marks to the TV content categories you want to block.

6.Press ADJUST to move to the Programs Not Rated box. Press ENTER to add or delete a check mark to allow or block programs that are not rated.

NOTE: Use care when choosing to block unrated programming. News programs and emergency bulletins carry the “None” or “NR” (Not Rated) V‑Chip rating, and these are blocked with this option active.

7.Press ADJUST to move to the Movie Rating box. Press ADJUST or to select the movie rating level you want to allow. See the next page for detailed information on rating guidelines.

8.To set the time of day when these restrictions will be in effect, press ADJUST to move to the Start box. To set the time:

a.With the highlight on the hour number, press ADJUST or repeatedly to change the hour. You can also just press and hold to change the hour.

b.Press ENTER to move the highlight to the minutes.

c.With the highlight on the minutes number, press ADJUST or repeatedly to change the minutes. Just press and hold to move quickly through the numbers.

d.Press ENTER to move the highlight to the am/ pm option. Press ADJUST or to make a selection.

9.Press TV MENU to save the settings and close the menu.

NOTE: To make the V-Chip restrictions active twenty- four hours a day, set the V-Chip Start and Stop to the same time.

The V-CHIP Button

Press the V-CHIP button on the remote control to turn the V‑Chip lock on and off without going through the menu. A screen will appear prompting you for your pass code. To change V-Chip settings, you must open the V‑Chip Lock Menu and then open the V-Chip menu.

Lock by Time

Lock by Time allows you to entirely block use of the TV during specified hours. During the lock time, you must use your pass code to view the TV. To lock the TV by time:

1.Press ADJUST or to select On or Off for Lock by Time.

2.Press ADJUST to move to the Lock Time box.

a.With the highlight on the hour number, press ADJUST or repeatedly to change the hour. You can also just press and hold to change the hour.

b.Press ENTER to move the highlight to the minutes.

c.With the highlight on the minutes number, press ADJUST or repeatedly to change the minutes. Just press and hold to move quickly through the numbers.

d.Press ENTER to move the highlight to the am/ pm option. Press ADJUST or to make a selection.

To make Lock by Time active 24 hours a day, set the Lock and Unlock Times to the same time.

Front Button Lock

Figure 20

Front Button Lock lets you disable controls on the front panel to prevent inadvertent changes to TV settings. Select On to disable the buttons and select Off to restore their operation.

To disable the front button lock without using the remote control, press and hold the MENU button on the front panel for more than eight seconds. If the TV is on, a message will display confirming release of the Front Button Lock.

Bypassing V‑Chip Lock and Lock by Time

If you try to watch blocked programming, a notice appears prompting you for a pass code. To use the TV:

•Input your four-digit pass code and press ENTER.

•Change to a channel airing an allowed program or change to another device.

If you try to use the TV when it is locked by time, a similar screen appears, prompting you for your pass code.

To reactivate the V-Chip lock or TV lock by time after using the pass code, power the TV off and then on.

Chapter 5. TV Menu Operations 77