TimeShuttle

NetCommand® Menu , continued

Figure 15

With TimeShuttle enabled, the FF and REW keys open a frame-by-frame view of the program. You can then search visually forward or backward to the exact program segment you want to watch. Turn off TimeShuttle if you wish to use the FF and REW keys for standard full-screen video scanning.

Figure 15. TimeShuttle search. Press PLAY to view a program starting with the highlighted frame in front.

TV Pause with TimeShuttle

To Enable TV Pause with TimeShuttle

1.In the NetCommand menu, select Always or On Request for TV Pause.

2.Select On for TimeShuttle.

3.Press HOME to close the menu.

To Use TV Pause with TimeShuttle

1.Press REW or FF. Press REW or FF up to three additional times to increase the search speed.

Note: If the TimeShuttle screen does not appear, allow more time for the recording to continue before trying again.

2.When a frame of the desired program segment appears, you can:

•Press PLAY to start watching the program from that frame.

•Press FF or REV to change the direction of the search.

If TV Pause is set to On Request, TimeShuttle becomes available when TV Pause is active. Press PAUSE to activate TV Pause for the current channel or device. You can then search backward as far as the point where you

first pressed the PAUSE key for the current channel and input.

TimeShuttle and TV Disc Recordings

To Enable TimeShuttle for TV Disc

1.Select On for TimeShuttle.

2.Press HOME to close the menu.

To Use TimeShuttle while Viewing TV Disc:

1.To display the TimeShuttle screen and search for the segment you want:

•Press REW to search backward.

•Press FF to search forward.

•Press REW or FF up to three additional times to increase the search speed.

2.When a frame of the desired program segment appears, you can:

•Press PLAY to start watching the program from that frame.

•Press FF or REW to change the direction of the search.

•Press PAUSE to freeze the image. Press PAUSE again to return to normal full-screen viewing.

To Turn Off TimeShuttle

When TimeShuttle is turned off, the FF and REW keys perform normal full-screen video scanning.

1.In the NetCommand menu, Select Off for TimeShuttle.

2.If you also wish to use the PIP/POP features, select Off for TV Pause.