Mitsubishi Electronics WD-62827 manual Operation of PIP and POP

Operation of PIP and POP

The Side-by-Side and PIP/POP features let you view pictures from two different sources at the same time. In summary:

	•	Analog channels
View as either main	•	Devices on Video/S-Video inputs
picture or sub-picture	•	Devices on Component inputs
	• Devices on either HDMI input
	• Digital channels received from CableCARD™ or either Antenna input
View as main picture	•	TV Disc
only	•	IEEE 1394 devices
	•	PC images

Press PIP/POP to activate the PIP/POP option. Repeatedly press the PIP/POP button on the TV remote control and within seconds of each press, the PIP/POP cycles through the display options below.

To turn PIP/POP off:

•Press PIP/POP repeatedly until the TV returns to full- screen mode.

•Press PIP/POP and wait at least 10 seconds. Press PIP/POP again. The next time you activate PIP/POP, the last-used PIP/POP option will be displayed.

			Side-by-side
."*/	4JEFCZ4JEF		pictures
1*$563&			(Not available
	4VC1JDUVSF
			when PC is one
			source)
."*/		101 
1*$563&			3 POP
4VC1JDUVSFT		101 	(Not available
			when PC is one
		101 	source)

Changing PIP/POP Device

When PIP/POP is displayed, press PIP DEVICE to change the PIP/POP picture source device. A menu similar to the Device Selection menu will be displayed.

Changing PIP/Side-by-Side Channels

Press PIP CH to scroll up and down through memorized channels on ANT-1 and ANT-2.

Exchanging Program Images

Press EXCH to exchange the main picture and the PIP/ POP picture. Pictures from digital channels can only be shown as the main picture. PC images can only be the main picture. If you press EXCH while viewing images from a PC, the TV exchanges audio with the PIP but leaves the main image in place.

Moving a PIP Image

If no menus are on screen, press ADJUST to move the PIP display anywhere on the main screen. When the main picture is from a PC, the PIP can be moved through four designated positions.

Automatic POP Switching

During POP display, the TV cycles through memorized analog channels on Ant-1 or Ant-2 or displays “strobed” images from playback of other A/V components. Press PAUSE to pause or restart automatic POP switching.

Selecting POP “Live” Image

Press ADJUST to select a different POP “live” image (automatic POP switching must be paused.)

"OU  9999	1*1 "OU 
4UBOEBSE
4UFSFP 4"1
571( %-47
427

1*1

4VC1JDUVSF

Ant-1 2 XXXX

Standard

Stereo SAP

TV-PG DLSV

SQV1

PIP

(Available for PC with PC as main picture only)

PIP off

Freezing the PIP and Side-by-Side Pictures

Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image.

IMPORTANT

•The Side-by-Side feature cannot show the picture from the same device or the same channel from the same antenna input on both sides.

•The main picture and a different sub- picture cannot both be from Ant-2.

•Pictures from HDMI-1 and HDMI-2 cannot be shown together as main and sub- pictures

•A PC picture can only be the main picture.

Chapter 6. Additional Features 87