Mitsubishi Electronics WD-62827 Antenna with a Single Lead, For antennas with flat twin leads

Connecting an Antenna with a Single Lead or Antennas with Separate UHF and VHF Leads

Antenna with a Single Lead

(not for use with CableCARD™)

Figure 3

For antennas with flat twin leads

A300-ohm-to-75-ohm transformer is required. This is not included with the TV, but is available at most electronics stores.

1.For an antenna with flat twin leads, connect the

300-ohm twin leads to the 300-ohm-to-75-ohm transformer.

2.Push the 75-ohm side of the transformer onto ANT-1 MAIN on the TV back panel.

For cable or antenna with coaxial lead

Connect the coaxial lead directly to ANT-1 MAIN on the TV back panel.

Antennas with Separate UHF and VHF Leads

Figure 4

A UHF/VHF combiner is required. This is not included with the TV, but is available at most electronics stores.

1.Connect the UHF and VHF antenna leads to the UHF/ VHF combiner.

2.Push the combiner onto ANT-1 MAIN on the TV back panel.

-&'5

.0/0

7)' "OUFOOB	6)' "OUFOOB	"6%*0
		3*()5
$IBOOFMT  $IBOOFMT 
		(-JOL¸
		*3 &.*55&3
		/FU $PNNBOE¸

%57$"#-&			'MBU 5XJO -FBE
64& 8*5)
7)'6)'
$BCMF$"3%™		%*(*5"-
		"6%*0	%57$"#-&
"/5   "69	"/5   ."*/	065165	7)'6)'	64& 8*5)
				$BCMF$"3%™	%*(*5"-
			"/5   "69	"/5   ."*/	"6%*0
					065165
			&YUFSOBM
			"OUFOOB
57 CBDL QBOFM EFUBJM			PS $BCMF
			57 CBDL QBOFM

0IN
'MBU
5XJO
-FBE

0IN	0INUP
$PBYJBM
	0IN
$BCMF	$PNCJOFS	
	6)'

 

0QUJPOBM
0IN

UP0IN

.BUDIJOH
5SBOTGPSNFS

7)'4OO!.4!-!).

#BDL 4JEF 7JFX 7JFX



Figure 4. Connecting separate UHF and VHF Antennas

Figure 3. Connecting a Single Antenna

Mitsubishi strongly recommends you avoid using antennas with flat twin leads. Flat twin lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable.

2 Chapter 2. Connecting