Motorola DHSB5100 installation manual Declaration of Conformity

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Re-orient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canadian Compliance

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.

FCC Declaration of Conformity

According to 47CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers, Motorola, Inc. Broadband Communications Sector, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility that the product identifies with 47CFR Part 2 and 15 of the FCC Rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept all interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR, Paragraph 15.101 to 15.109.

The SURFboard cable modem meets one or more of the standards listed:

Declaration of Conformity

We

Motorola, Inc.

Broadband Communications Sector

101 Tournament Drive

Horsham, PA, U.S.A.

Declare under our sole responsibility that the

SURFboard Cable Modem Model SB5100 Series

To which the declaration relates is in conformity with one of the following standards:

EN55022	EN55024	EN60950 (3rd Edition)
CISPR 22	CISPR 24	IEC60950 (3rd Edition)

following the provisions of the Directive(s) of the Council of the European Union:

EMC Directive 89/336/EEC Low Voltage Directive 73/23/EEC

Directive 93/68/EEC

This product was qualified under test conditions that included the use of the supplied cable between system components. To be in compliance with regulations, the user must use this cable and install it properly.

Model	Standards
SB5100	FCC Part 15, ICES-003, UL/C-UL 60950 (3rd Edition)
SB5100E	EN55022, EN55024, EN60950 (3rd Edition), CISPR 22, CISPR 24, IEC60950 (3rd Edition)
SB5100i	EN55022, EN55024, EN60950 (3rd Edition), CISPR 22, CISPR 24, IEC60950 (3rd Edition), FCC Part 15,
	UL/C-UL 60950 (3rd Edition)