Event Log Messages

B-3

RNG-RSP Ranging Response

Code

Event Log Messages

Level

Cable Modem Actions

 

 

 

 

R00.0

RNG-RSP Ranging Response

 

 

 

 

 

 

R01.0

NO Maintenance Broadcasts for Ranging

 

 

 

opportunities Received T2 time-out.

 

 

 

 

 

 

R02.0

No Ranging Response received, T3 time-

 

 

 

out

 

 

 

 

 

 

R03.0

Ranging Request Retries exhausted.

 

 

 

 

 

 

R04.0

Received Response to Broadcast

 

 

 

Maintenance Request, But no Unicast

 

 

 

Maintenance opportunities received. T4

 

 

 

time-out.

 

 

 

 

 

 

R05.0

Started Unicast Maintenance Ranging no

 

 

 

Response received. T3 time-out.

 

 

 

 

 

 

R06.0

Unicast Maintenance Ranging attempted,

 

 

 

No Response, Retries exhausted.

 

 

 

 

 

 

R07.0

Unicast Ranging Received Abort

 

 

 

Response, Re-initializing MAC.

 

 

 

 

 

 

RNG-REQ Ranging Request

 

 

 

 

 

 

Code

Event Log Messages

Level

Cable Modem Actions

 

 

 

 

R100.0

RNG-REQ Ranging Request

 

 

 

 

 

 

R101.0

No Ranging Requests received from

 

 

 

POLLED CM (CMTS generated polls)

 

 

 

 

 

 

R102.0

Retries exhausted for polled CM (report

 

 

 

SID). After 16 R101.0 errors.

 

 

 

 

 

 

R103.0

Unable to Successfully Range CM (report

 

 

 

SID) Retries Exhausted. Note: this is

 

 

 

different from R102.0 in that it was able to

 

 

 

try; i.e., got REQs but failed to Range

 

 

 

properly.

 

 

 

 

 

 

R104.0

Failed to receive Periodic RNG-REQ from

 

 

 

modem (SID X), Timing-out SID.

 

 

 

 

 

 

REG-REQ Registration Request

 

 

 

 

 

 

Code

Event Log Messages

Level

Cable Modem Actions

 

 

 

 

I100.0

REG-REQ Registration Request

7 (Info)

No action taken

 

 

 

 

I101.0

Invalid MAC header.

 

 

 

 

 

 

I102.0

Invalid SID, not in use.

 

 

 

 

 

 

SURFboard Cable Modem Installation Manual

Page 75
Image 75
Motorola DHSB5100 R00.0, R01.0, R02.0, R03.0, R04.0, R05.0, R06.0, R07.0, R100.0, R101.0, R102.0, R103.0, R104.0, I100.0