B |
Debugger General Information
Terminal Input/Output Control
When entering a command at the prompt, the following control codes may be entered for limited command line editing.
Note The presence of the caret ( ^ ) before a character indicates that the Control (CTRL) key must be held down while striking the character key.
^X | (cancel line) | The cursor is backspaced to the beginning of the line. If |
|
| the terminal port is conÞgured with the hardcopy or |
|
| TTY option (refer to PF command), then a carriage |
|
| return and line feed is issued along with another |
|
| prompt. |
|
|
|
^H | (backspace) | The cursor is moved back one position. The character at |
|
| the new cursor position is erased. If the hardcopy |
|
| option is selected, a Ò/Ó character is typed along with |
|
| the deleted character. |
|
|
|
^D | (redisplay) | The entire command line as entered so far is |
|
| redisplayed on the following line. |
|
|
|
^A | (repeat) | Repeats the previous line. This happens only at the |
|
| command line. The last line entered is redisplayed but |
|
| not executed. The cursor is positioned at the end of the |
|
| line. You may enter the line as is or you can add more |
|
| characters to it. You can edit the line by backspacing |
|
| and typing over old characters. |
|
|
|
<DEL> | (delete or rubout) | Performs the same function as ^H. |
|
|
|
When observing output from any 177Bug command, the XON and XOFF characters which are in effect for the terminal port may be entered to control the output, if the XON/XOFF protocol is enabled
