Section 3 | Configuration |
|
|
BASIC Page – All Configuration Options
Options related to: CONTROLLING ACCESS TO THE CONFIGURATION UTILITY
Field | Description |
|
|
Configuration | Sets your user name to access this |
Login Username: | FACTORY DEFAULT: admin |
| |
Configuration | Sets your password to access this |
Login Password: | FACTORY DEFAULT: motorola |
|
NOTE: Once you have logged in, for security reasons you should change the default User Name and Password. If necessary, the default settings can be reset, either by clicking the Restore Factory Configuration button at the bottom of the BASIC Page (which will reset all options to factory defaults), or by using the Reset button on the back of the WR850 (which, as referenced in Section 1 of this User Guide, will reset only a select number of options).
If you wish, you can disable access control by leaving both the Configuration Login Username and Configuration Login Password blank, but this is not recommended.
Remote Login Port:
(ADVANCED)
Enables access to the
FACTORY DEFAULT: (blank)
Options related to: ENABLING PRIMARY ROUTER FUNCTIONS
Field | Description |
|
|
|
|
Operation Mode: | Enables the primary router functions of the WR850. These router |
|
(ADVANCED) | functions include: |
|
| • Routing data in your local network using IP addresses of the |
|
| connected devices, allowing the IP address for your |
|
| broadband connection to be shared among those devices. |
|
| This is called Network Address Translation (NAT). |
|
| (continued on next page) |
|
|
|
|
WR850 |