Installation | Section 2 |
|
|
2To print the Wall Mounting Template, click the Print icon or choose Print from the File menu.
3In both the Pages from and to fields, enter the page number on which the Wall Mounting Template appears.
4Click OK.
5Measure the printed template with a ruler to ensure that it is the same size as the template on page
6Use a center punch to mark the center of the holes on the wall.
7On the wall, locate the marks for the mounting holes you just made.
WARNING!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
8Drill the holes to a depth of at least 3.8 cm (11⁄2 inches).
9If necessary, seat an anchor in each hole. Use M5 x 38 mm
WR850 |
