Motorola WR850GP manual

Section 3 Configuration

Field	Description
802.1X	• Selecting Enabled sets the WR850 to work with a RADIUS
Authentication:	server, without engaging WPA or WPA2 (below).
(continued)	• Selecting Disabled sets the WR850 to work with a RADIUS
	server only if used with WPA or WPA2 (below).
	NOTE: 802.1X Authentication requires you to complete the
	configuration options related to “Setting Up Compatibility with
	a RADIUS Server”.
	NOTE: 802.1X Authentication can be enabled concurrently with WPA
	or WPA2, but the WR850 can only support one RADIUS server
	on the network.
	FACTORY DEFAULT: Disabled
WPA:	Enables 802.1X-based WPA authentication with a RADIUS server.
(ADVANCED)	• Selecting Enabled engages WPA.
	• Selecting Disabled disengages WPA.
	NOTE: WPA requires you to complete the configuration options related
	to “Setting Up Compatibility with a RADIUS Server”.
	NOTE: WPA requires a WPA Encryption method (below).
	FACTORY DEFAULT: Disabled
WPA2:	Enables 802.1X-based WPA2 authentication with a RADIUS server.
(ADVANCED)	• Selecting Enabled engages WPA2.
	• Selecting Disabled disengages WPA2.
	NOTE: WPA2 requires you to complete the configuration options related
	to “Setting Up Compatibility with a RADIUS Server”.
	NOTE: WPA2 requires a WPA Encryption method (below).
	FACTORY DEFAULT: Disabled
WPA2 Pre-	Enables clients to authenticate, in advance, with multiple access
authentication:	points, in order to roam quickly among access points.
(ADVANCED)	• Selecting Enabled allows clients to pre-authenticate with the
	WR850.
	• Selecting Disabled does not allow clients to pre-authenticate
	with the WR850.
	NOTE: WPA2 Pre-authenticationis greyed out and unchangeable
	unless WPA2 (above) is Enabled.
	FACTORY DEFAULT: Disabled

3-62 WR850