Multi-Tech Systems DT101/xx, DT102/xx owner manual Cts

DataTalker Owner’s Manual

A series of configuration menus provides simple and complete configuration information for each aspect of the DataTalker. From the Main Menu, you can access menus to configure the unit, display statistics, reset various functions within the DataTalker, and run diagnostic tests:

Main Menu

1 - Configurations

2 - Statistics

3 - Reset Options

4 - Diagnostics

5 - Exit Command Mode

6 - QUICK SETUP

Selection : _

To go to the Configurations menu, enter 1 and press ENTER. The Configurations menu appears. From this menu you can configure the data port, voice/fax channel(s), or the composite link. This menu also allows you to select various factory defaults and store your current configuration.

Configurations

1 - Data Port Configuration

2 - Voice/Fax Channel(s) Configuration

3 - Composite Link Configuration

4 - Factory Default Configuration Options

5 - Configure Remote Unit

S - Store All Configurations

M - Main Menu

P - Previous Menu

Selection : _

For configuration 2, start by configuring the data port. Enter 1 and press ENTER. The Data Port Configuration menu appears:

Data Port Configuration

1	-	Async/Sync:		Async
2	-	Speed:		19200
3	-	Word	Length:	8
4	-	Stop	Bits:	1
5	-	Parity:		None
6	-	Flow	Control:	CTS
7	-	Enq/Ack Flow Control:		Off
8	-	Echo:		Off
9	-	Pacing:		Off
10 - EIA Pass Through:				Off
11	-	Pass	Xon:	Off

S- Store All Configurations M - Main Menu

P - Previous Menu Selection : _

26