Multi-Tech Systems DT101/xx, DT102/xx owner manual Listing On-Line Diagnostics, 144

DataTalker Owner’s Manual

Listing On-Line Diagnostics L8

The L8 command displays the current on-line CONNECT status status of the MMH2834. This display can be printed and used as a modem status report or as diagnostic information (such as when calling Tech Support).This report is given only when on-line. To activate this command first type +++AT<CR> (on-line escape command while maintaining command mode), then type ATL8. What then displays on your monitor is your modem's current on-line condition (e.g., Link Type, Line Speed, Serial Speed, Type of Error Correction/Data Compression, Number of past Retrains,etc.).

An example of L8 listing is shown below:

ATL8
******	ONLINE DIAGNOSTICS		******
LINK TYPE		V.34
LINE SPEED		28800
SERIAL SPEED		115200
ERROR CNTRL/COMPRESS		LAPM COMPRESSED
FALL BACK/FORWARD		LOCALLY ENABLED
LINE TYPE		DIAL UP
DATA FORMAT		ASYNCHRONOUS
LINE QUALITY		0010=EXCELLENT, 8=FAIR, 16=BAD
RECV. SIGNAL LEVEL		-016.5 dBM
TRANS SIGNAL LEVEL		-013 dBM
NUMBER OF RETRAINS		000
ROUND TRIP DELAY		00ms (MEANINGFUL IN V32 MODE ONLY)

144