AppendixA Specificationsfor AT-MIO-16E-1, AT-MIO-16E-2,and AT-MIO-64E-3
©NationalInstruments Corporation A-9 ATE Series User Manual
Mins ource pulseduration ......................10 ns in edge-detect mode
Mingate pulse duration ..........................10 ns in edge-detect mode
Data transfers .........................................DMA, interrupts,
programmed I/O
DMA modes........................................... Single transfer, demandtransfer
Triggers
Analog Trigger
Source.....................................................ACH<0..63>, PFI0/TRIG1
Level.......................................................± full-scale, internal;
±10 V, external
Slope.......................................................Positive or negative
(software selectable)
Resolution.............................................. 8 bits, 1 in 256
Hysteresis...............................................Programmable
Bandwidth (–3 dB).................................1.5 MHz internal,
7 MHz external
External input (PFI0/TRIG1)
Impedance.......................................10 kΩ
Coupling .........................................DC
Protection........................................–0.5toV
cc +0.5Vwhen
configured as a digital signal
±35 V when configuredas an
analog trigger signal or disabled
±35Vpoweredoff
Digital Trigger
Compatibility......................................... TTL
Response................................................ Rising or falling edge
Pulsewidth ............................................. 10 ns min