National Instruments AT E Series Analog Output (AT-MIO-16XE-10only)

AppendixA Specificationsfor AT-MIO-16XE-10and AT-AI-16XE-10
ATE Series User Manual A-24 ni.com
Crosstalk, DC to 100 kHz
Adjacent channels............................–75 dB max
Allo ther channels............................–90 dB max
Stability
Offsettemperature coefficient
Pregain.............................................±5 µV/°C
Postgain...........................................±120 µV/°C
Gaintemperature coefficient..................±7 ppm/°C
Analog Output (AT-MIO-16XE-10only)
Output Characteristics
Numberof channels ................................2 voltage
Resolution...............................................16 bits, 1 in 65,536
Maxupdate rate......................................100 kS/s
Type of DAC .........................................Double-buffered
FIFObuffer size ......................................2,048samples
Data transfers..........................................DMA, interrupts,
programmed I/O
DMA modes ...........................................Singletransfer, demand transfer
TransferCharacteristics
Relative accuracy (INL).........................± 0.5 LSB typ, ±1 LSB max
DNL........................................................±1 LSB max
Monotonicity..........................................16 bits, guaranteed
Offseterror
Aftercalibration...............................305 µV max
Before calibration ............................20 mV max