AppendixA Specificationsfor AT-MIO-16E-1, AT-MIO-16E-2,and AT-MIO-64E-3
ATE Series User Manual A-10 ni.com
RTSI
Triggerlines ............................................7
Calibration
Recommendedwarm-up time .................15 min
Calibrationinterval .................................1 year
Externalcalibration reference .................>6 and <10 V
Onboard calibration reference
Level................................................5.000 V (±3.5 mV) (over full
operating temperature, actual
valuestored in EEPROM)
Temperaturecoefficient...................±5 ppm/°Cmax
Long-termstability ..........................±15 ppm/
Bus Interface
Type.................................................Slave
Power Requirement
+5VDC (±5%).......................................1.0 A
Poweravailable at I/O connector............+4.65 VDC to
+5.25VDCat1A
Physical
Dimensions
(notincluding connectors) ......................33.8 by 9.9 cm
(13.3by3.9in.)
I/O connector
AT-MIO-16E-1,
AT-MIO-16E-2................................68-pinmale SCSI-II type
AT-MIO-64E-3................................100-pinfemale 0.050 D-type
1,000 h