AppendixA Specificationsfor AT-MIO-16E-1, AT-MIO-16E-2,and AT-MIO-64E-3
©NationalInstruments Corporation A-11 ATE Series User Manual
Maximum Working Voltage
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth.....................................42 V, Installation Category II
Channel-to-channel................................ 42 V, Installation Category II
Environmental
Operatingtemperature ............................0 to 55 °C
Storagetemperature ...............................20 to 70 °C
Humidity................................................ 10 to 90%RH, noncondensing
Maximum altitude ..................................2,000 meters
Pollution degree (indoor useonly) ......... 2
Safety
The DAQdevice meets the requirements of the following standards for
safety andelectrical equipment for measurement, control, and laboratory
use:
EN 61010-1:1993/A2:1995, IEC 61010-1:1990/A2:1995
UL 3101-1:1993, UL 3111-1:1994, UL 3121:1998
CAN/CSA c22.2 no. 1010.1:1992/A2:1997
Electromagnetic Compatibility
CE,C-Tick, and FCC Part 15 (Class A) Compliant
Electricalemissions ................................EN 55011 Class A at 10 m
FCCPart 1 5A above 1 GHz
Electricalimmunity ................................Evaluated to EN 61326:1998,
Table 1
Note For full EMC compliance, you must operate this device with shielded cabling.
In addition, all covers and filler panels must be installed. Refer to the Declaration of
Conformity (DoC) for this product for any additional regulatory compliance information.
To obtain the DoC for this product, click Declarationof Conformity at
ni.com/hardref.nsf/.This Web site lists the DoCs by product family. Select the