National Instruments AT E Series - page 45

Chapter3 HardwareOverview
©NationalInstruments Corporation 3-19 ATE Series User Manual
Figure3-14. CONVERT*Signal Routing
This figureshows that CONVERT* can be generated from a number of
sources, including the external signals RTSI<0..6>and PFI<0..9> and the
internalsignals SampleInterval Counter TC and GPCTR0_OUT.
Manyof these timing signals are also available as outputs on the RTSI pins,
asindicated in the RTSI Triggers section later in this chapter, and on the PFI
pins,as indicated in Chapter 4, C onnecting Signals.
RTSITrigger<0..6>
PFI<0..9>
CONVERT*
SampleInterval Counter TC
GPCTR0_OUT