AppendixA Specificationsfor AT-MIO-16E-10 and AT-MIO-16DE-10
©NationalInstruments Corporation A-13 ATE Series User Manual
Inputsprotected ......................................ACH<0..15>, AISENSE
FIFObuffer size.....................................512 samples
Data transfers .........................................DMA, interrupts,
programmed I/O
Transferrate (1 word = 8 bits)............... 50 kwords/s
DMA modes........................................... Single transfer, demandtransfer
Configurationm emory size....................512 words
TransferCharacteristics
Relative accuracy ................................... ±0.2 LSB typdithered,
±1.5 LSB max undithered
DNL....................................................... ±0.2 LSB typ, ±1.0 LSB max
Nomissing codes ................................... 12 bits, guaranteed
Offseterror
Pregain errorafter calibration......... ±2 µV max
Pregain error before calibration...... ±24 mV max
Postgain errorafter calibration .......±0.5 mV max
Postgain error before calibration ..... ±100 mV max
Gain error (relative to calibration reference)
Aftercalibration (Gain = 1)............ ±0.01% of reading max
Before calibration ........................... ±2.0% of readingmax
Gain ≠1 with gain error
adjusted to 0 atgain = 1 .................. ±0.05% of reading max
Amplifier Characteristics
Input impedance
Normalpowered on ........................ 100 GΩin parallel with 50 pF
Poweredo ff.....................................3 kΩmin
Overload..........................................3 kΩmin
Inputbias current ...................................±200 pA