AppendixA Specificationsfor Maximum Signal Ratings for AT Series Devices
ATE Series User Manual A-38 ni.com
Electromagnetic Compatibility
CE,C-Tick, and FCC Part15 (ClassA ) Compliant
Electricalemissions ................................EN 55011 Class A at 10 m
FCCPart 1 5A above 1 GHz
Electricalimmunity ................................Evaluated to EN 61326:1998,
Table 1
Note For full EMC compliance, you must operate this device with shielded cabling.
In addition, all covers and filler panels must be installed. Refer to the Declaration of
Conformity (DoC) for this product for any additional regulatory compliance information.
To obtain the DoC for this product, click Declarationof Conformity at
ni.com/hardref.nsf/.This Web site lists the DoCs by product family. Select the
appropriate product family, followed by the product, and a link to the DoC appears in
Adobe Acrobat format. Click the Acrobat icon to download or read the DoC.
Maximum Signal Ratings for AT Series Devices
Note NIis no t liable for anydamage resulting from signal connectionsthat exceed these
ratings. Refer to the warrantyfor specific information on warranty coverage.
Connectionsthat exceed any of the maximum ratings of input signals on the
data acquisition (DAQ)devices listed in the table below can damage the
computer and the device.
Note These are the absolute maximum ratings of the input signals, not the working
ratings.Refer to the usermanual for th ereco mmended operating conditions of the device.
Usethe following specifications as definitive values. Signal ratings change
depending on whether the DAQdevice is powered on or off.
SignalName
AT-MIO-16E-1
AT-MIO-16E-2
AT-MIO-64E-3
AT-MIO-16XE-10
AT-AI-16XE-10
AT-MIO-16E-10
AT-MI O-16DE -10 AT-MIO-16XE-50
On Off On Off On Off
ACH<x>±25 V ±15V ±35V ±25V ±25V ±15V
AISENSE ±25V ±15V ±35V ±25V ±25V ±15V