|
| Information displayed by "switchshow" | |
|
|
|
|
Item | Displayed data |
| Description |
Port | 0 - 23 |
| Correspond to the port numbers of the FC Switch Module. |
Media |
| No SFP module is installed on ports (for external ports only). | |
| Cu |
| Media of copper type is installed. (The value is fixed for internal ports). |
| id |
| An SFP module of fibre type is installed. |
Speed | 2G |
| The port data rate is fixed to 2G bps. |
| 4G |
| The port data rate is fixed to 4G bps. |
State | No_Module |
| No SFP module is installed. |
| Online |
| The Fibre channel device is linked up normally. |
|
|
| Either of the following two messages appears in normal linkup status |
|
|
| depending on the port topology of the connected fibre channel device: |
|
|
| "Online |
|
|
| "Online |
| No_Sync |
| The SFP module receives optical signals but the fibre channel device is |
|
|
| not linked up normally. |
| No_light |
| The SFP module does not receive optical signals. |
You can identify the fault location by comparing the information shown by "switchshow" with the actual connection.
The state messages for the internal and external ports unavailable to
- 105 -