4.Port status LED (located to the left of each port number)
LED status | Description | |
| No signals are sent to the SFP module, a proper cable is not | |
OFF | connected to the SFP module or a fibre channel device is not | |
| connected to the SFP module. | |
Illuminating in green | No traffics flow in the online status (with a device connected). | |
Blinking in green | The port is in the online status and traffics flow through the port. | |
(irregular blinking) |
| |
Illuminating in umber | The port receives optical signals but does not enter into the | |
online status yet. | ||
| ||
Blinking in umber slowly | As a result of | |
and the port is in the disable status. * | ||
Blinking in umber fast | The port is in the fault status. * | |
| ||
Blinking in umber and green | The port is in the bypass mode. * | |
alternately |
|
A device error occurs in each status with asterisk mark (*) in the table
above. Contact your service representative.
5.Port speed LED (located to the right of each port number)
LED status | Description |
OFF | 1G bps mode |
Illuminating in green | 2G bps mode |
Illuminating in umber | 4G bps mode |
The FC Switch Module does not support the connection of a device with port
data rate 1Gbps yet.
- 43 -