Before zoning can be set, proper configuration including zones created previously must be generated. More than one configuration can be created.
1) Creating configuration
Use the "cfgcreate" command to create a configuration file.
Use of "cfgcreate" command
cfgcreate | "cfgName" | , "member;member;member" | |
| (1) |
| (2) |
(1)cfgName:
Specify the name of a zone configuration to be created with it enclosed by double quotation marks (").
(2)member:
Specify a zone name already created with it enclosed by double quotation marks (").
Delimit the configuration name and the first zone name with a comma (,).
Delimit adjacent zone names with a semicolon (;).
1.Type "zoneshow" on the console screen.
HW060000955:admin> zoneshow Defined configuration: zone: zone1 1,0;1,1 zone: zone2 1,2;1,3 zone: zone3 1,4;1,5 zone: zone4 1,6;1,7
Effective configuration: no configuration in effect
HW060000955:admin>
Confirm that all required zones are created. Create one or more zones if necessary.
2.Use the "cfgcreate" command to create configuration.
HW060000955:admin>
HW060000955:admin> cfgcreate "cfg1","zone1;zone2;zone3;zone4"
HW060000955:admin>
If a zone name not registered in the zone information is specified, the
command causes an error to occur. The configuration is not created normally. Always specify zone names already created.
- 133 -