Modifying or Deleting Configuration File

The following describes modification or deletion of configuration already created..

„After modification by using a relevant command, confirm that the

modification is done normally by using the "zoneshow" command.

1.Add a zone to zone configuration Use the "cfgadd" command.

Using the "cfgadd" command allows a zone to be added to zone configuration.

„Format of "cfgadd" command

cfgadd

"cfgName" ,

"member" <enter>

 

(1)

(2)

 

(1)cfgName:

Specify a zone configuration name with it enclosed with double quotation marks (").

(2)member:

Specify a zone name to be added with it enclosed with double quotation marks (").

2.Delete a zone from zone configuration Use the "cfgremove" command.

Using the "cfgremove" command allows a zone to be deleted from zone configuration. „ Format of "cfgremove" command

cfgremove "cfgName" , "member" <enter>

(1)(2)

(1)cfgName:

Specify a zone configuration with it enclosed with double quotation marks (").

(2)member:

Specify the zone name to be deleted with it enclosed with double quotation marks (").

3.Delete a configuration file created already Use the "cfgdelete" command.

Using the "cfgdelete" command allows specified zone configuration to be deleted. „ Format of "cfgdelete" command

cfgdelete "cfgName" <enter>

(1)

(1)cfgName:

Specify a zone configuration with it enclosed with double quotation marks (").

4.Delete all zoning information

Using the "cfgclear" command allows all zoning information to be deleted. Using the "cfgclear" command allows zone configuration to be deleted.

„ Format of "cfgclear" command

cfgclear <enter>

„Before the "cfgclear" command can be executed, the zoning information

being enabled must be disabled by using the "cfgdisable" command. Zoning information can be deleted by using the "cfgclear" command. However, the zoning being enabled at execution of the "cfgclear" command is still effective after the execution.

- 138 -