The following describes modification or deletion of a zone already created.
After modification by using a relevant command, confirm that the
modification is done normally by using the "zoneshow" command.
1.Add port information, WWPn and zone alias name to a zone. Use the "zoneadd" command.
Using the "zoneadd" command allows additional information (including port information, WWPn and zone alias name) to be added to a zone.
zoneadd "zonename" , "member" <enter>
(1)(2)
(1)zonename:
Specify a zone name with it enclosed with double quotation marks (").
(2)member:
Specify port information, WWPn or zone alias.
Delimit the zone name and additional information with a comma (,).
Delimit adjacent additional information with a semicolon (;).
2.Delete port information, WWPn and/or zone alias name from a zone. Use the "zoneremove" command.
Using the "zoneremove" command allows port information, WWPn and/or zone alias name to be deleted from a zone.
zoneremove "zonename" , "member" <enter>
(1)(2)
(1)zonename:
Specify a zone name with it enclosed with double quotation marks (").
(2)member:
Specify port information, WWPn or zone alias.
Delimit the zone name and additional information with a comma (,).
Delimit adjacent information to be deleted with a semicolon (;).
3.Delete a zone created already. Use the "zonedelete" command.
Using the "zonedelete" command allows a zone to be deleted.
zonedelete "zonename" <enter>
(1)
(1)zonemame:
Specify a zone name with it enclosed with double quotation marks (").
- 137 -