2.According to the User’s Guide of the Blade Enclosure (SIGMABLADE), remove the dummy module or blank cover on the switch module slot into which the FC Switch Module will be inserted.

„ For the procedure of removing a dummy module or blank cover from the switch module slot of the Blade Enclosure (SIGMABLADE), refer to the User’s Guide attached to Blade Enclosure (SIGMABLADE).

3.Unlock the stopper of the ejector on the FC Switch Module to unlatch the ejector.

„ Press the stopper lightly in the right direction to unlock the stopper. Then the ejector is unlatched.

4.According to the User’s Guide of the Blade Enclosure (SIGMABLADE), install the FC Switch Module in the Blade Enclosure (SIGMABLADE).

„ Push the FC Switch Module lightly to insert its connector into a mating connector on the Blade Enclosure (SIGMABLADE).

- 47 -