4-3. Setting FC Switch Module

To use the FC Switch Module, the following information must be set.

„Password,

„Network (required),

„Port data rate (required),

„Port topology (required),

„Domain ID,

„Checking / Setting Principal Selection Mode

„Zoning (required), and

„Time and time server

„ See "Appendix Device Setting Features" for how to use the features.

CAUTION

Notes on settings

If one or more setting items required for the FC Switch Module are set incorrectly, a system fault may occur. Before executing a job, you should be familiar with its feature and influence sufficiently.

- 53 -