1.Type "cfgshow" on the console screen.
Any commands used on the switch console should be specified with lowercase letters.
2.The current zoning information appears.
Without zoning information, skip to "Creating zone alias name" and following. With some zoning information, recheck setting change to take proper action.
<No existence of zoning information>
HW060000955:admin> cfgshow
Defined configuration:
Effective configuration:
Effective configuration: no configuration in effect HW060000955:admin>
<Existence of zoning information>
HW060000955:admin> cfgshow Defined configuration: cfg: zone_cfg
|
| zone1; zone2 | |
zone: | zone1 | 1,0; | 1,1 |
zone: | zone2 | 1,4; | 1,5 |
Effective configuration: |
| ||
cfg: | zone_cfg |
|
|
zone: | zone1 | 1,0 |
|
|
| 1,1 |
|
zone: | zone2 | 1,4 |
|
|
| 1,5 |
|
If enabled zoning information appears, take note on change of zoning
information. Zoning information is actually changed when configuration is enabled after the change. Some setting errors before and/or after zoning change may cause a system fault to occur.
- 128 -