NETGEAR SSL312 - page 91

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Network Resources 8-3
v1.0, August 2006
.
2. From the Object Type pull-down menu under Add Resource Addresses, select either IP
Address or IP Network:
• If IP Address was selected, enter an IP address or fully qualified domain name in the IP
Address/Name field.
• If IP Network was selected, enter the IP network address in the Network Address field.
Enter the mask length in the Mask Length (0-31) field.
3. Click Add Resource to add the IP address or IP network to the Network Resource. The new
configuration will be displayed in the Defined Resource Addresses table, as shown in the
example below.
You may define up to 128 addresses or address ranges per Network Resource.
Figure 8-4