NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Figure
The inactivity timeout can be set at the user, group and global level. Set the timeout as 0 in the user and group configuration to use the global timeout setting. If multiple timeout settings are configured, the user timeout setting will take precedence over the group timeout and the group timeout will take precedence over the global timeout.
The maximum timeout setting is 232 or over 100,000 minutes, although setting the timeout to 0 on the Global Settings page disables the inactivity timeout (if 0 is also configured as the inactivity timeout for the user and group).
Defining and Editing Group Policies
With group access policies, all traffic is allowed by default. Additional allow and deny policies may be created by destination address or address range and by service type.
Group and User Access Policies |
