Network Technologies ASI-IP-GTW, DVB-ASI to IP user manual

ASI-IP-GTW User's Manual

Resulting total rate: This is the resulting total IP bitrate including FEC overhead for this channel. The Status frame contains status parameters related to the FEC setting.

Column UDP port: This parameter is the UDP port used for the column FEC data. The value is always Media UDP port + 2 which is in accordance with Pro-MPEG CoP 3.

Row UDP port: This parameter is the UDP port used for the row FEC data. The value is always Media UDP port + 4 which is in accordance with Pro-MPEG CoP 3.

Data rate: This parameter shows the IP data rate for this channel excluding FEC data.

Column FEC rate: This parameter shows the IP data rate for the column FEC data of this channel.

Row FEC rate: This parameter shows the IP data rate for the row FEC data of this channel.

In order to make it possible to demonstrate the function of the FEC engine, ASI-IP-GTW provides a mode to drop IP packets on the transmitter.

Frame drop: Enter the percentage of packets to be dropped from this channel. This value is not stored in the unit and must be entered after each power on.

Frames dropped: This counter shows the number of frames discarded at the output of the unit.

Page 43