Network Technologies DVB-ASI to IP, ASI-IP-GTW Appendix E Upgrading Software, Upgrade SW

ASI-IP-GTW User's Manual

11 Appendix E: Upgrading Software

SW loading can be performed from the bottom of the /upgrade page, as shown in Figure 40.

This option is available on SW versions 1.3.0 and above. To load SW on older SW versions, please refer to documentation on how to load SW by FTP.

Press the ‘Browse’ button and select the file to load to the device. The file must have the filename extension ‘.out’. Then press the ‘Upload Software’ button to start the SW loading.

Figure 40 Upgrade SW

File loading from this page uses HTTP port 80, making it useful to pass through firewalls. If you have not blocked pop-ups in your browser, a progress meter (Figure 41) is displayed during file transfer. By pressing the ‘cancel’ button the transmission can be cancelled. If you do not see the progress meter, the SW loading can still be interrupted by pressing the stop button in your browser.

Page 90