Max frames delay: This field shows the maximum number of frames delay measured for the FEC streams.
Latency required: This field is calculated from the ‘Max frames delay’ field and the current total bitrate to show the minimum delay needed by the FEC engine to fully utilize the incoming FEC streams.
When the delay displayed in the ‘Latency’ field of the ‘IP RX Status’
For Column and Row the following status parameters are shown: UDP port: The UDP port of the stream.
Bitrate: The bitrate of the incoming FEC stream.
RTP sequence error: This counter shows the RTP sequence errors in the incoming stream caused by lost IP frames or
Page 49
