3.8 Network
Figure 25 shows the Network page for a unit configured to bi- directional operation of the Ethernet interface. The purpose of this page is to provide network related information.
Figure 25. Network page for unit in IP TX mode
1.1.1.31 Data Network Interface Status
Interface speed: Shows the rate in Mbit/s of the data network interface.
Duplex mode: Full duplex or half duplex dependent of the configuration of the port.
Total RX bitrate: The total bitrate of IP frames received over the network data interface.
RX load: The percentage of the total interface speed used by the IP frames received over the network data interface.
Total TX bitrate: The total bitrate of IP frames sent over the network data interface.
TX load: The percentage of the total interface speed used by the IP frames sent over the network data interface.
1.1.1.32 Transmitted Network streams
The transmitted network streams table shows a list of all ASI inputs.
For each individual ASI input, the tables shows the name of the input, if input is enabled (Yes/No), the IP destination address of the stream, the UDP destination port, the total bitrate of the interface (in Mbit/s).
Page 54
