Network Technologies DVB-ASI to IP, ASI-IP-GTW user manual Preventive Maintenance and Fault-finding

ASI-IP-GTW User's Manual

6 Preventive Maintenance and Fault-finding

6.1 Introduction

This chapter provides the schedules and instructions, where applicable, for routine inspection, cleaning and maintenance of the ASI-IP-GTW to be carried out by the operator of the unit.

6.2 Preventive Maintenance

6.2.1 Routine Inspection

1.1.1.35 Cooling fans

This equipment must never be used unless all the cooling fans are working. They should be checked when the unit is switched on and periodically thereafter.

6.2.2 Cleaning

oRemove power from the unit.

oClean the external surfaces of the ASI-IP-GTW with a soft cloth dampened with a mixture of mild detergent and water.

oMake sure that the unit is completely dry before reconnecting it to a power source.

6.2.3 Servicing

Warning: Do not attempt to service this product as opening or removing covers may expose dangerous voltages or other hazards. Refer all servicing to service personnel who have been authorised by Network.

1.1.1.36 Damage requiring service

Unplug the unit from the power and refer servicing to qualified personnel under the following conditions:

oThe power supply cord or plug is damaged

oLiquid has been spilled or objects have fallen into the product o Product has been exposed to rain or water

oProduct does not operate normally by following the operating instructions

oProduct has been dropped or has been damaged o Product exhibits a distinct change in performance

6.3 Maintenance

6.3.1 Warranty

The ASI-IP-GTW is covered by standard Network warranty service for a period of 12 months from delivery.

Page 70