Figure 26 shows the Network page for a unit configured to IP-RX mode.
Figure 26. Network page for unit in IP RX mode
We see that only received network streams is visible. The Data Network Interface Status is the same for an IP transmitter and an IP receiver.
1.1.1.33 Received Network streams
The network streams table of a unit configured for IP reception shows a list of all ASI outputs.
For each individual ASI output, the table shows the name of the output, if the output is enabled (Yes/No), the IP source address, the UDP port, the total bitrate of the interface (in Mbit/s) and a counter showing RTP sequence errors.
Page 55
