Network Technologies DVB-ASI to IP AC Power Supply, Power Cable and Protective Earth

ASI-IP-GTW User's Manual

have ordered the unit with less than 4 ASI ports, the enabled ports starts at number 1 up to the number of ports ordered.

In IP bi-directional mode, half the DVB-ASI connectors are used as inputs, and the other half as DVB-ASI outputs. ASI connectors 1, 2, 5 and 6 are used as inputs, while ASI connectors 3, 4, 7 and 8 are used as outputs.

1.1.1.10 Ethernet data port

Connect the Ethernet data port to the network. In IP transmit mode, the ASI-IP-GTW will send an IP stream to the network. In IP receive mode, the ASI-IP-GTW will receive an IP stream from the network.

1.1.1.11 Power supply

Section 2.3 provides details of the power supply, protective earth and security. Read all these instructions, prior to connecting the unit to power mains.

1.1.1.12 Management port

The ASI-IP-GTW provides one Ethernet port for control and management. Connect the management port to the management network.

1.1.1.13 Technical Earth

Connect the Technical earth to a suitable earth point.

1.1.1.14 Alarm

The ASI-IP-GTW provides an alarm relay for connection to external alarm system.

2.3 Power

2.3.1 AC Power Supply

The ASI-IP-GTW provides a wide-ranging power supply covering a rate voltage range 100-240Vac, 50/60Hz. Please refer to

Appendix B: Technical Specification for a detailed specification of the AC power supply.

2.3.2 Power Cable and Protective Earth

Warning: This product should be operated only from the type of power source indicated on the marking label. Please consult a qualified electrical engineer or your local power company if you are not sure of the power supply to your business.

1.1.1.15 General

Ensure that the AC power cable is suitable for the country in which the unit is to be operated.

Page 18