
Chapter 4
Configuration via the Command Line Interface
4.2.3 Create a New Authentication Attribute
add command The ipsec peer auth add command allows adding a new authentication attribute.
Example In the following example, a new authentication attribute is created, named secret1
[ipsec]=> [ipsec]=>peer [ipsec peer]=>auth [ipsec peer auth]=>add name = secret1
:IPSec peer auth add name=secret1 [ipsec peer auth]=>
The result of this operation can be verified with the list command.
[ipsec peer auth]=>list |
|
[secret1] | : <unset> |
Authtype | |
[ipsec peer auth]=> |
|
107 | |
|