Nortel Networks 620, 608(WL) manual Peer Profiles

Chapter 3

Configuration via Local Pages

3.5.1 Peer Profiles Page

Peer Profiles The Peer Profiles page bundles all parameters that define a Peer. page layout

A number of parameters makes use of symbolic descriptors that are defined and managed on other sub-pages. On the Profiles page, these descriptors are selected by their symbolic name from a list. Therefore, you need to prepare the descriptors in other Peers sub-pages, before a complete Peer Profile can be composed in the Peer Profiles page.

Peer name Give the peer a symbolic name. This name only has local significance inside the

SpeedTouch™. This parameter is not used in the IKE negotiations with the remote

Security Gateway.

Remote address This address localizes the remote Security Gateway in the IP network. Either the public IP address or the Fully Qualified Domain Name can be used as an identifier.

Backup remote address When a redundant remote Security Gateway is available, its public IP address or domain name can be specified here. In a basic IPSec configuration, you leave this field open.

78 E-DOC-CTC-20051017-0169 v0.1