Nortel Networks 620, 608(WL) manual Set or Modify the Authentication Attribute Parameters, Secret1

Chapter 4

Configuration via the Command Line Interface

4.2.4Set or Modify the Authentication Attribute Parameters

modify command The ipsec peer auth modify command allows to modify the authentication attribute parameters.

Example In this example, the parameters of the authentication attribute are set to use the pre-shared key authentication method. The secret password entered by the user is not shown in readable format on the screen. An encrypted version is shown instead.

[ipsec	peer auth]=>modify
name =	secret1
[type] =		cert
preshared
[type] = preshared

[secret] = *******

Please retype secret for verification. [secret] = *******

:IPSec peer auth modify name=secret1 type=preshared secret=_DEV_CE84DC8 0F07F679B

[ipsec peer auth]=>

Pressing the TAB key when a user entry is required displays the valid entries.

108 E-DOC-CTC-20051017-0169 v0.1