Chapter 4

Configuration via the Command Line Interface

4.6.2 Create a New Network Descriptor

add command A new Network Descriptor is created with the ipsec connection network add command.

Example In the following example, a new Network descriptor is created, named net1:

[ipsec]=>

[ipsec]=>connection

[ipsec connection]=>network [ipsec connection network]=>add name = net1

:IPSec connection network add name=net1 [ipsec connection network]=>

The result of this operation can be verified with the list command.

[ipsec connection network]=>list [net1] : <unset>

[ipsec connection network]=>

For the newly created Network Descriptor in this example, all parameters are unset.

Setting of the parameters is described in the next section.

138

E-DOC-CTC-20051017-0169 v0.1

 

Page 140
Image 140
Nortel Networks 620, 608(WL) manual Create a New Network Descriptor