Starting and stopping a VPN client connection
Page layout for
Automatic Start
Chapter 3
Configuration via Local Pages
Two start mechanisms are defined:
Manual Dialup
Automatic Start.
When you use
Selecting the Manual Dialup method, no further parameters have to be configured. You have to dial in to the VPN server each time you need the secure connection. Whenever you dial in, you have to enter a set of parameters to join the VPN.
Select the Automatic Start method when multiple terminals in your LAN have access to the secure connection, and individual users do not need to authenticate. The set of parameters required to access the VPN server are stored in the SpeedTouch™ configuration. Furthermore. you specify the range of local terminals that may access the secure VPN connection. Once configured, the automatic start procedure provides permanent access to the secure connection for the authorized terminals, without further user interaction.
When you use
The set of parameters depends on the selected Server Vendor.
When you selected generic, the following set of parameters is shown:
When you selected cisco, the following set of parameters is shown:
When you selected nortel, the following set of parameters is shown:
Interworking with a Nortel VPN server is possible only when IKE
! Authentication is done via Certificates.
57 | |
|
