List all Connection Security Descriptors

Configuration via the Command Line Interface

4.5.2 List all Connection Security Descriptors

list command The ipsec connection descriptor list command shows the list of all defined Connection Security Descriptors.

Example The example below shows the pre-defined Connection Security Descriptors of the SpeedTouch™:

=>ipsec

[ipsec connection]=>descriptor [ipsec connection descriptor]=>list

[AES_SHA1_TUN] : AES(128) HMAC-SHA1 Lifetime 86400s Tunnel Mode

[AES_MD5_TUN] : AES(128) HMAC-MD5 Lifetime 86400s Tunnel Mode

[AES_SHA1_PFS_TUN] : AES(128) HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode

[AES_MD5_PFS_TUN] : AES(128) HMAC-MD5 PFS Lifetime 86400s Tunnel Mode

[3DES_SHA1_TUN] : 3DES HMAC-SHA1 Lifetime 86400s Tunnel Mode

[3DES_MD5_TUN] : 3DES HMAC-MD5 Lifetime 86400s Tunnel Mode

[3DES_SHA1_PFS_TUN] : 3DES HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode

[3DES_MD5_PFS_TUN] : 3DES HMAC-MD5 PFS Lifetime 86400s Tunnel Mode

[DES_SHA1_TUN] : DES HMAC-SHA1 Lifetime 86400s Tunnel Mode

[DES_MD5_TUN] : DES HMAC-MD5 Lifetime 86400s Tunnel Mode

[AES_SHA1_Adv_TUN] : AES(256) HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode

[3DES_SHA1_Adv_TUN] : 3DES HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode

[NullEnc_SHA1_TUN] : NULL HMAC-SHA1 Lifetime 86400s Tunnel Mode [ipsec connection descriptor]=>..

[ipsec connection]=>.. [ipsec]=>

E-DOC-CTC-20051017-0169 v0.1	131