Chapter 3
Configuration via Local Pages
3.5.6 VPN-Server Page
The configuration of a VPN server scenario is described in detail in section “3.3 VPN Server” on page 63 and following. The
Server descriptor name This name is used internally to identify the VPN Server Descriptor. This name appears in the Client/Server list on the Peer Profiles page.
Virtual IP Range Specifies the range of IP addresses from which the VPN client addresses are selected. An address range or a subnet can be entered for this parameter.
Netmask Specifies the netmask provided to the VPN client. Use the dotted decimal format.
For example: 255.255.255.0
Push IP Select this check box when you want the VPN server to take the initiative for assigning an IP address to the VPN clients via IKE Mode Config.
When the check box is not selected, the VPN clients will request an IP address from the VPN server.
Domain The domain name provided to the VPN clients via IKE Mode Config.
Primary DNS The IP address of the primary DNS server, provided to the VPN clients via IKE Mode Config. This is the primary DNS server in the local network that is open to VPN clients.
88 | |
|
