Chapter 3

Configuration via Local Pages

3.5.8 Connection Profiles Page

Connection Profiles

The Connection Profiles page bundles all parameters that define an IPSec

page layout

Connection to a Peer. In other words it bundles the Phase 2 parameters.

A number of parameters makes use of symbolic descriptors that are defined and managed on other sub-pages. On the Profiles page, these descriptors are selected by their symbolic name from a list. Therefore, you need to prepare the descriptors in other Connections sub-pages, before a complete Connection Profile can be composed in the Connection Profiles page.

Connection name Give the connection a symbolic name. This name only has local significance inside the SpeedTouch™. This parameter is not used in the IPSec negotiations with the remote Security Gateway.

Peer name Select from the list the name of the peer you want to connect to.

E-DOC-CTC-20051017-0169 v0.1

91

 

Page 93
Image 93
Nortel Networks 608(WL), 620 manual Connection Profiles