Nortel Networks 608(WL) Confirm the IKE Authentication , IKE, Advanced Peers Security Descriptors

Chapter 3

Configuration via Local Pages

Main Mode initial page When you click Main Mode, the following page is displayed:

By clicking a button, the page layout changes, revealing other fields and buttons.

More information about the various fields and buttons is found below.

Buttons You can use one of the following buttons:

Click ...	To ...
Use Preshared Key Authentication	Reveal additional parameter fields
	required for the configuration of
	Preshared Key Authentication.
Use Certificate Authentication	Reveal additional parameter fields
	required for the configuration of
	Certificate Authentication.
Specify Additional Descriptors	Reveal additional fields where you can
	specify alternative IKE Security
	Descriptors.
Apply	Confirm the IKE Authentication, IKE
	Security Descriptors and Miscellaneous
	parameters and reveal additional
	parameters to complete the remote
	Security Gateway profile.

IKE Security Descriptors

The IKE Security Descriptor bundles the security parameters used for the IKE Security Association (Phase1).

A number of IKE Security Descriptors are pre-configured in the SpeedTouch™, and can be selected from a list. Select a Security Descriptor in compliance with the IKE security parameters configured in the remote Security Gateway.

The contents of the IKE Security Descriptors can be verified via

Advanced > Peers > Security Descriptors.

E-DOC-CTC-20051017-0169 v0.1 41